Posts Tagged ‘mini primus cylinder oven’

Mini Gas cylinder stove

Wednesday, October 26th, 2011

Having seen several versions of gas cylinder stoves recently, I felt I should have a go at designing and building one too. Wanting to test out my skills and ideas first, I figured a mini version would be a good way to start. I had several old primus 1 kilo gas cylinders under the house, waiting for a chance to prove useful, so one got it’s chance.


The design was roughly sketched out then transfered to the cylinder.

 

Primus mini cylinder stove

marked and drilled mini cylinder

Purging the old cylinder of any remaining gas was my main concern. I burnt off the last of the gas using the camp BBQ then opened the filling vent fully. This allowed me to fill the cylinder with water and then drill out a couple of small holes to completely fill, drain and re-fill the cylinder again. Confident that any remaining gas was gone, I drilled the bigger holes next.

Primus mini cylinder stove

Vent and fire grate holes in base

Holding the cylinder steady without a big vice was a problem. When the larger drill bits, 8-10mm, grabbed and dug into the metal, the cylinder, drill bit and power drill were in danger of becoming a wild, spinning missile!

Sand pit vice

Bolts stop spinning in sand pit vice

Never one to be easily deterred, I considered my options. Hence, the newly invented and awaiting patent, sand pit vice. A brick either side with the sand packed in behind, held the cylinder securely for the drilling of 10mm holes around the base to act as air intakes. These then allowed for bolts to be pushed through and act to stop the cylinder spinning when drilling out the top holes for the flue pipe. Holes drilled!
The sand pit vice then helped hold the cylinder still for the cutting out of the door panel.
Once tidied up, it was time for a quick test and paint burn off.

Primus mini cylinder stove

Test fire and paint burn off

The small fire proved tricky to keep alight, as it’s heat was quickly dissipated. Much of it through the flue hole by all appearances.

Primus mini cylinder stove

Flames and heat out the flue hole

Next steps include working out a flue and baffle system and door hinge and latching design.
Stay tuned!
Brian.